Free SVG files for Cricut

Free cut files that upload to Cricut Design Space as clean, welded shapes. No weld or attach step, no stray pieces, and each design’s page tells you how small it can be cut.

18,888 designs pass. The test: Every design in the library that is made for cutting. Patterns of loose dots are left out. Free for personal and commercial use. What you can do with them.

Shapes

Flowers and nature

Show all 58 sets in Flowers and nature

Animals

Show all 101 sets in Animals

Christmas and winter

Show all 33 sets in Christmas and winter

Halloween and autumn

Holidays and seasons

Celebrations

Show all 43 sets in Celebrations

Sports and school

Show all 37 sets in Sports and school

Food and drink

Show all 37 sets in Food and drink

Objects and vehicles

Show all 158 sets in Objects and vehicles

Symbols

Show all 55 sets in Symbols

Frames and borders

States and maps

Show all 101 sets in States and maps

Letters and monograms

Show all 26 sets in Letters and monograms

Words and sayings

Show all 718 sets in Words and sayings

How to upload an SVG to Cricut Design Space

  1. Download the SVG from a design’s page.
  2. In Design Space, start a new project and choose Upload, then Upload Image.
  3. Browse to the SVG and open it. It arrives as a cut image with nothing to clean up.
  4. Add it to the canvas and set the width you need.
  5. Choose Make It, pick your material and cut.

What size will it cut?

Every file is 100 mm (about 4 inches) on its longer side, and Design Space lets you resize freely. What changes with size is the thinnest part of the design. Each design’s page lists that at seven sizes from 1 to 12 inches. As a guide, parts of 1 mm and wider cut and weed cleanly in vinyl; thinner than that takes a fresh blade and patience.

On a standard 12 × 12 inch mat a Cricut Explore or Maker cuts up to 11.5 inches wide.

Layered designs

Designs marked Layered have one shape per colour, stacked. In Design Space each layer shows separately in the Layers panel: give each its own colour and the machine will ask for each material in turn.

Questions

Do I need to weld or attach these files?

No. Each single-colour file is already one welded shape, so its parts stay in position on the mat.

Can I use them with Print Then Cut?

Yes. Upload the PNG from the design’s page as a Print Then Cut image, or change the SVG’s operation to Print Then Cut in Design Space.

Will they work on a Cricut Joy?

Yes. A Joy cuts up to 4.5 inches wide, so choose designs whose narrowest part is still at least 1 mm at that size; the table on each design’s page shows it.

By machine