Free vinyl cut files

Free SVG files picked for adhesive and heat-transfer vinyl. Each was measured: one piece, nothing thinner than 1 mm when cut 2 inches across, and no more than 40 cut-outs to weed.

4,676 designs pass. The test: One piece, a narrowest part of at least 2 mm at the file’s 100 mm size (1 mm at 2 inches), and at most 40 outlines. Free for personal and commercial use. What you can do with them.

Shapes

Flowers and nature

Show all 54 sets in Flowers and nature

Animals

Show all 100 sets in Animals

Christmas and winter

Show all 29 sets in Christmas and winter

Halloween and autumn

Holidays and seasons

Celebrations

Show all 30 sets in Celebrations

Sports and school

Show all 36 sets in Sports and school

Food and drink

Show all 33 sets in Food and drink

Objects and vehicles

Show all 151 sets in Objects and vehicles

Symbols

Show all 53 sets in Symbols

Frames and borders

States and maps

Show all 99 sets in States and maps

Letters and monograms

Show all 26 sets in Letters and monograms

Words and sayings

Show all 27 sets in Words and sayings

What makes a file good for vinyl

Vinyl fails in two ways: thin parts lift or tear as you weed, and designs with dozens of tiny cut-outs take longer to weed than to cut. So the designs here pass two tests. Their thinnest part is at least 1 mm wide at 2 inches across, and they have no more than 40 outlines in all. Within each set, the ones with the shortest cut are shown first.

Bigger is always easier. If you are cutting at 4 inches or more, almost everything in the full library will weed without trouble.

Cutting and weeding tips

  • Do a small test cut first. The right blade depth cuts the vinyl and only scores the backing.
  • Weed from a corner at a low angle, and warm stubborn vinyl slightly with a hair dryer.
  • For heat-transfer vinyl, mirror the design before cutting. Symmetric designs look the same either way; anything with a direction does not.
  • Use transfer tape for designs with separate inner details so they keep their spacing.

Sizes for common jobs

  • Mug or tumbler: 2.5 to 3.5 inches.
  • Car window decal: 4 to 6 inches.
  • Adult T-shirt front: 9 to 11 inches wide.
  • Laptop: 2 to 4 inches.

Questions

How small can I cut these in vinyl?

Every design here stays at 1 mm or wider at 2 inches across. Each design’s page shows its narrowest part at 1 inch too; under 1 mm, expect slow weeding.

Do I need to mirror the file?

For heat-transfer vinyl, yes: it is cut from the back. For adhesive vinyl, no, unless it goes on the inside of a window.

By machine