Free stencil SVG files

Every letter and every saying in the library as a stencil: a plate with the words cut through it, and every closed letter bridged so that the middle of an O or an A stays attached. One piece each, ready to tape down and paint.

759 designs in 759 sets. Free for personal and commercial use, no sign-up. What you can do with them.

Flower SVG 1 of 26 designs

Mandala SVG 1 of 22 designs

Mermaid scales 1 of 19 designs

Buffalo plaid 1 of 15 designs

Honeycomb 1 of 17 designs

Chevron 1 of 21 designs

Camo patterns 1 of 16 designs

Clock SVG 1 of 14 designs

751 more sets

Show all 751 sets

Painting through a stencil

Cut the plate from stencil film or thin card, or from adhesive vinyl for a curved or rough surface. Stick or tape it flat. Load a stiff brush or a sponge with very little paint and dab straight down; brushing sideways pushes paint under the edges. Lift the stencil while the paint is still wet.

The bridges are about 2 mm wide at 100 mm. If you would rather not see them, touch them in with a fine brush once the stencil is off.

Questions

Can any design be used as a stencil?

Any single-piece design can be used the other way round: cut it out and paint through the hole it leaves. The silhouettes are the ones to start with.

More themes

All free SVG files