Free camo SVG

Camo stencil panel SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Camo stencil panel, as a solid black shape
Camo stencil panel. The preview is the SVG file itself.

A rounded square with the camo shapes cut out as holes and bridges at least 3 mm wide left between them. One piece: spray or sponge through it, move it along, and overlap in a second colour.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut24: 1 outer edge and 23 cut-outs
Cut length1,482 mm at this size
Narrowest shape3.1 mm at this size
Thinnest wall between cut-outs3 mm at this size
Nodes544 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest shapeCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.79 mm376 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.6 mm753 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)2.4 mm1,129 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)3.1 mm1,506 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)4.7 mm2,259 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)6.3 mm3,011 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)9.4 mm4,517 mm1Any material, including 3 mm wood and acrylic

The narrowest shape is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More camo SVG files

← Seamless camo tile All 16 camo patterns Camo heart in four layers →