Free camo SVG

Camo star in three layers SVG

Camo star in three layers, in layered colours
Camo star in three layers. The preview is the SVG file itself.

A five-pointed star in urban greys: a pale grey star with slate and black camo shapes cut to its outline. The whole star is the bottom layer, so the points stay sharp.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 95 mm (3.94 × 3.74 in), scales to any size
Pieces17 separate pieces
Outlines to cut17 outlines
Cut length966 mm at this size
Narrowest shapeNothing narrower than 6 mm at this size
Nodes279 curve and line segments
Layers3: layer 1 star, layer 2 slate and layer 3 black

Measured from the file. PNG: 2,000 × 1,906 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest shapeCut lengthFit on a 12 in sheetRule of thumb
1 × 0.95 in (25 × 24 mm)Over 1.5 mm245 mm100Vinyl, card and thin sheet
2 × 1.9 in (51 × 48 mm)Over 3 mm491 mm25Any material, including 3 mm wood and acrylic
3 × 2.85 in (76 × 72 mm)Over 4.6 mm736 mm9Any material, including 3 mm wood and acrylic
4 × 3.8 in (102 × 97 mm)Over 6.1 mm981 mm6Any material, including 3 mm wood and acrylic
6 × 5.71 in (152 × 145 mm)Over 9.1 mm1,472 mm2Any material, including 3 mm wood and acrylic
8 × 7.61 in (203 × 193 mm)Over 12 mm1,963 mm1Any material, including 3 mm wood and acrylic
12 × 11.41 in (305 × 290 mm)Over 18 mm2,944 mm1Any material, including 3 mm wood and acrylic

The narrowest shape is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More camo SVG files

← Camo circle All 16 camo patterns Camo border strip in four layers →