Free camo SVG

Tiger stripe camo in three layers SVG

Tiger stripe camo in three layers, in layered colours
Tiger stripe camo in three layers. The preview is the SVG file itself.

Tiger stripe camouflage: long strokes lying side to side that swell, pinch and end in points, in green and brown with fine black stripes over them.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces69 separate pieces
Outlines to cut69 outlines
Cut length4,796 mm at this size
Narrowest shape3.8 mm at this size
Nodes1,311 curve and line segments
Layers3: layer 1 green, layer 2 brown and layer 3 black

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest shapeCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.97 mm1,218 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.9 mm2,436 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)2.9 mm3,655 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)3.9 mm4,873 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)5.8 mm7,309 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)7.7 mm9,745 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)12 mm14,618 mm1Any material, including 3 mm wood and acrylic

The narrowest shape is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More camo SVG files

← Desert camo in three layers All 16 camo patterns Digital camo in three layers →