Pig silhouette SVG
A round farm pig in profile: a flat snout, a flopped ear, four trotters and a curled tail. Slits mark the ear, the eye and the smile; the rest is solid.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 55 mm (3.94 × 2.17 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 448 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 170 curve and line segments |
Measured from the file. PNG: 2,000 × 1,138 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.55 in (25 × 14 mm) | 0.61 mm | 114 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.1 in (51 × 28 mm) | 1.2 mm | 228 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.66 in (76 × 42 mm) | 1.8 mm | 341 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.21 in (102 × 56 mm) | 2.4 mm | 455 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.31 in (152 × 84 mm) | 3.7 mm | 683 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.42 in (203 × 112 mm) | 4.9 mm | 910 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.62 in (305 × 168 mm) | 7.3 mm | 1,366 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Pig face 
Show pig 
Piggy bank with a coin 
Cute pig sitting 
Pig butt 
Pig head from the side 
Pig with a bandana 
Pig with a bow 