Pig face SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A pig looking straight at you: a round head, two folded ears, shining eyes and a wide snout with two nostrils. The features are cut through and the face is one piece.
What is in the file
| Size | 100 × 95 mm (3.94 × 3.74 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 816 mm at this size |
| Narrowest part | 4.1 mm at this size |
| Nodes | 181 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,906 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.95 in (25 × 24 mm) | 1 mm | 207 mm | 100 | Vinyl, card and thin sheet |
| 2 × 1.9 in (51 × 48 mm) | 2.1 mm | 415 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.85 in (76 × 72 mm) | 3.1 mm | 622 mm | 9 | Any material, including 3 mm wood and acrylic |
| 4 × 3.8 in (102 × 97 mm) | 4.2 mm | 829 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.71 in (152 × 145 mm) | 6.2 mm | 1,244 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.61 in (203 × 193 mm) | 8.3 mm | 1,658 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.41 in (305 × 290 mm) | 12 mm | 2,487 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.