Pig with a bandana SVG
The pig face with a spotted bandana tied under its chin, farmhouse style. Cut it as one piece, or cut the bandana again in a second colour and layer it.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 78 × 100 mm (3.07 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 17: 1 outer edge and 16 cut-outs |
| Cut length | 863 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 191 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,575 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.78 × 1 in (20 × 25 mm) | 0.51 mm | 219 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 1.56 × 2 in (40 × 51 mm) | 1 mm | 438 mm | 30 | Vinyl, card and thin sheet |
| 2.34 × 3 in (59 × 76 mm) | 1.5 mm | 658 mm | 12 | Vinyl, card and thin sheet |
| 3.12 × 4 in (79 × 102 mm) | 2 mm | 877 mm | 6 | Vinyl, card and thin sheet |
| 4.67 × 6 in (119 × 152 mm) | 3 mm | 1,315 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.23 × 8 in (158 × 203 mm) | 4.1 mm | 1,754 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.35 × 12 in (237 × 305 mm) | 6.1 mm | 2,630 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Pig with a bow 
Pig snout 
Pig ears and snout 
Pig monogram frame 
Pig with butcher cuts 
Flying pig 
Wild hog pig silhouette 
Sow and two piglets 