Pig with butcher cuts SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The farm pig facing right and divided by slits into the main cuts: head, shoulder, loin, two halves of belly and ham. Each slit stops short of the outline, so it stays one piece. For BBQ signs and aprons.
What is in the file
| Size | 100 × 55 mm (3.94 × 2.17 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 685 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 210 curve and line segments |
| Also found as | BBQ pig SVG |
Measured from the file. PNG: 2,000 × 1,138 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.55 in (25 × 14 mm) | 0.25 mm | 174 mm | 160 | Too fine for most machines |
| 2 × 1.1 in (51 × 28 mm) | 0.51 mm | 348 mm | 45 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.66 in (76 × 42 mm) | 0.76 mm | 522 mm | 18 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.21 in (102 × 56 mm) | 1 mm | 696 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.31 in (152 × 84 mm) | 1.5 mm | 1,044 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.42 in (203 × 112 mm) | 2 mm | 1,392 mm | 2 | Vinyl, card and thin sheet |
| 12 × 6.62 in (305 × 168 mm) | 3 mm | 2,088 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.