Show pig SVG
A show pig set up for the ring: level back, head up, ears forward, a deep ham and longer legs than the farm pig. For stock show shirts, pen signs and ribbons boards.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 60 mm (3.94 × 2.37 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 541 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 199 curve and line segments |
Measured from the file. PNG: 2,000 × 1,233 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.6 in (25 × 15 mm) | 0.58 mm | 137 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.2 in (51 × 31 mm) | 1.2 mm | 275 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.8 in (76 × 46 mm) | 1.8 mm | 412 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.4 in (102 × 61 mm) | 2.3 mm | 550 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.61 in (152 × 92 mm) | 3.5 mm | 824 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.81 in (203 × 122 mm) | 4.7 mm | 1,099 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.21 in (305 × 183 mm) | 7 mm | 1,649 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Piggy bank with a coin 
Cute pig sitting 
Pig butt 
Pig head from the side 
Pig with a bandana 
Pig with a bow 
Pig snout 
Pig ears and snout 