Cute pig sitting SVG
A little pig facing you with a big head, a round tummy, front legs together, two cloven back trotters and its tail curling out to one side. The face is cut through and the pig is one piece.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 62 × 100 mm (2.45 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 12: 1 outer edge and 11 cut-outs |
| Cut length | 714 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 210 curve and line segments |
Measured from the file. PNG: 1,273 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.62 × 1 in (16 × 25 mm) | 0.48 mm | 181 mm | 140 | Too fine for most machines |
| 1.24 × 2 in (32 × 51 mm) | 0.97 mm | 363 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 1.87 × 3 in (47 × 76 mm) | 1.4 mm | 544 mm | 15 | Vinyl, card and thin sheet |
| 2.49 × 4 in (63 × 102 mm) | 1.9 mm | 725 mm | 8 | Vinyl, card and thin sheet |
| 3.73 × 6 in (95 × 152 mm) | 2.9 mm | 1,088 mm | 3 | Vinyl, card and thin sheet |
| 4.98 × 8 in (126 × 203 mm) | 3.9 mm | 1,451 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.46 × 12 in (190 × 305 mm) | 5.8 mm | 2,176 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Pig butt 
Pig head from the side 
Pig with a bandana 
Pig with a bow 
Pig snout 
Pig ears and snout 
Pig monogram frame 
Pig with butcher cuts 