Pig ears and snout SVG
Two folded ears and a snout as three loose pieces, set out as they sit on a face. Stick them on a headband and a paper cup, or on a pink balloon.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 81 mm (3.94 × 3.18 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 7: 3 outer edges and 4 cut-outs |
| Cut length | 515 mm at this size |
| Narrowest part | 6 mm at this size |
| Nodes | 60 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,631 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.81 in (25 × 21 mm) | 1.5 mm | 131 mm | 120 | Vinyl, card and thin sheet |
| 2 × 1.62 in (51 × 41 mm) | 3 mm | 262 mm | 30 | Any material, including 3 mm wood and acrylic |
| 3 × 2.42 in (76 × 62 mm) | 4.6 mm | 392 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.23 in (102 × 82 mm) | 6.1 mm | 523 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.85 in (152 × 123 mm) | 9.1 mm | 785 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.46 in (203 × 164 mm) | 12 mm | 1,046 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.7 in (305 × 246 mm) | 18 mm | 1,570 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Pig monogram frame 
Pig with butcher cuts 
Flying pig 
Wild hog pig silhouette 
Sow and two piglets 
Pig outline 
Pig silhouette 
Pig face 