Sow and two piglets SVG
A sow with two piglets trotting in front of her, all in profile and nose to tail. They overlap, so the three pigs cut as one piece.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 34 mm (3.94 × 1.35 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 398 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 281 curve and line segments |
Measured from the file. PNG: 2,000 × 737 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.34 in (25 × 9 mm) | 0.43 mm | 101 mm | 220 | Too fine for most machines |
| 2 × 0.69 in (51 × 17 mm) | 0.86 mm | 202 mm | 65 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.03 in (76 × 26 mm) | 1.3 mm | 303 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.37 in (102 × 35 mm) | 1.7 mm | 404 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.06 in (152 × 52 mm) | 2.6 mm | 607 mm | 5 | Vinyl, card and thin sheet |
| 8 × 2.74 in (203 × 70 mm) | 3.5 mm | 809 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 4.12 in (305 × 105 mm) | 5.2 mm | 1,213 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Pig outline 
Pig silhouette 
Pig face 
Show pig 
Piggy bank with a coin 
Cute pig sitting 
Pig butt 
Pig head from the side 