Pig butt SVG
A pig seen from behind: two round hams, a curly tail cut as a spiral, two trotters and the tips of the ears above. The cheeky view for farm signs and BBQ aprons.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 83 × 100 mm (3.26 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 548 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 193 curve and line segments |
Measured from the file. PNG: 1,671 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.83 × 1 in (21 × 25 mm) | 0.64 mm | 139 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.66 × 2 in (42 × 51 mm) | 1.3 mm | 278 mm | 30 | Vinyl, card and thin sheet |
| 2.49 × 3 in (63 × 76 mm) | 1.9 mm | 418 mm | 12 | Vinyl, card and thin sheet |
| 3.32 × 4 in (84 × 102 mm) | 2.5 mm | 557 mm | 6 | Vinyl, card and thin sheet |
| 4.97 × 6 in (126 × 152 mm) | 3.8 mm | 835 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.63 × 8 in (168 × 203 mm) | 5.1 mm | 1,114 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.95 × 12 in (253 × 305 mm) | 7.6 mm | 1,670 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Pig head from the side 
Pig with a bandana 
Pig with a bow 
Pig snout 
Pig ears and snout 
Pig monogram frame 
Pig with butcher cuts 
Flying pig 