Free pig SVG

Pig head from the side SVG

Pig head from the side, as a solid black shape — Pig head from the side. The preview is the SVG file itself.

A pig head seen side on: a round cheek, a long snout with a flat end, an ear tipped forward and a smile. Slits mark the ear, the eye, the nostril and the jowl. For butcher and farm shop signs.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 84 mm (3.94 × 3.29 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	494 mm at this size
Narrowest part	3.7 mm at this size
Nodes	90 curve and line segments

Measured from the file. PNG: 2,000 × 1,685 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.84 in (25 × 21 mm)	0.94 mm	125 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.67 in (51 × 42 mm)	1.9 mm	251 mm	30	Vinyl, card and thin sheet
3 × 2.51 in (76 × 64 mm)	2.8 mm	376 mm	12	Vinyl, card and thin sheet
4 × 3.34 in (102 × 85 mm)	3.8 mm	502 mm	6	Any material, including 3 mm wood and acrylic
6 × 5.02 in (152 × 127 mm)	5.6 mm	753 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.69 in (203 × 170 mm)	7.5 mm	1,004 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.03 in (305 × 255 mm)	11 mm	1,506 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pig SVG files

← Pig butt All 17 pigs Pig with a bandana →