Piggy bank with a coin SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A fat round money box pig with a coin dropping into the slot on its back. The coin is welded to the pig, so the whole thing is one piece. For savings jars and reward charts.
What is in the file
| Size | 100 × 84 mm (3.94 × 3.3 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 455 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 163 curve and line segments |
Measured from the file. PNG: 2,000 × 1,687 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.84 in (25 × 21 mm) | 0.28 mm | 116 mm | 110 | Too fine for most machines |
| 2 × 1.67 in (51 × 43 mm) | 0.56 mm | 231 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.51 in (76 × 64 mm) | 0.84 mm | 347 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.35 in (102 × 85 mm) | 1.1 mm | 462 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.02 in (152 × 128 mm) | 1.7 mm | 693 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.7 in (203 × 170 mm) | 2.2 mm | 925 mm | 1 | Vinyl, card and thin sheet |
| 12 × 10.04 in (305 × 255 mm) | 3.4 mm | 1,387 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.