Free monster SVG

One-eyed monster SVG

One-eyed monster, as a solid black shape
One-eyed monster. The preview is the SVG file itself.

A round ball of fur with one big eye, two horns, waving arms and a grin with two teeth. The pupil stays joined to the rim of the eye, so nothing falls out. Exactly symmetrical.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 88 mm (3.94 × 3.47 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length719 mm at this size
Narrowest part3.8 mm at this size
Nodes331 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,771 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.88 in (25 × 22 mm)0.97 mm183 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.76 in (51 × 45 mm)1.9 mm365 mm30Vinyl, card and thin sheet
3 × 2.64 in (76 × 67 mm)2.9 mm548 mm12Vinyl, card and thin sheet
4 × 3.52 in (102 × 90 mm)3.9 mm731 mm6Any material, including 3 mm wood and acrylic
6 × 5.29 in (152 × 134 mm)5.8 mm1,096 mm2Any material, including 3 mm wood and acrylic
8 × 7.05 in (203 × 179 mm)7.7 mm1,461 mm1Any material, including 3 mm wood and acrylic
12 × 10.57 in (305 × 269 mm)12 mm2,192 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monster SVG files

← Monster outline All 16 monsters Cute monster with feelers →