Free monster SVG

Three-eyed monster with tentacles SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Three-eyed monster with tentacles, as a solid black shape
Three-eyed monster with tentacles. The preview is the SVG file itself.

A dome with three eyes on stalks, a grin with four teeth and four curling tentacles in place of legs. Exactly symmetrical, and smooth enough to cut from felt.

What is in the file

Size100 × 92 mm (3.94 × 3.62 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length837 mm at this size
Narrowest part1.2 mm at this size
Nodes304 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,844 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.92 in (25 × 23 mm)0.3 mm213 mm100Too fine for most machines
2 × 1.84 in (51 × 47 mm)0.61 mm425 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.76 in (76 × 70 mm)0.91 mm638 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.68 in (102 × 93 mm)1.2 mm850 mm6Vinyl, card and thin sheet
6 × 5.51 in (152 × 140 mm)1.8 mm1,276 mm2Vinyl, card and thin sheet
8 × 7.35 in (203 × 187 mm)2.4 mm1,701 mm1Vinyl, card and thin sheet
12 × 11.03 in (305 × 280 mm)3.7 mm2,551 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monster SVG files

← Tall monster with long arms All 16 monsters Monster face with three eyes →