Free monster SVG

Girl monster with a bow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Girl monster with a bow, as a solid black shape
Girl monster with a bow. The preview is the SVG file itself.

A pear-shaped monster with a big bow on her head, long eyelashes, one tooth, small arms and a curly tail. For birthday invitations and matching sibling shirts.

What is in the file

Size100 × 88 mm (3.94 × 3.46 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length788 mm at this size
Narrowest part1.5 mm at this size
Nodes320 curve and line segments

Measured from the file. PNG: 2,000 × 1,765 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.88 in (25 × 22 mm)0.38 mm200 mm110Too fine for most machines
2 × 1.76 in (51 × 45 mm)0.76 mm400 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.63 in (76 × 67 mm)1.1 mm600 mm12Vinyl, card and thin sheet
4 × 3.51 in (102 × 89 mm)1.5 mm801 mm6Vinyl, card and thin sheet
6 × 5.27 in (152 × 134 mm)2.3 mm1,201 mm2Vinyl, card and thin sheet
8 × 7.02 in (203 × 178 mm)3 mm1,601 mm1Any material, including 3 mm wood and acrylic
12 × 10.54 in (305 × 268 mm)4.6 mm2,402 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monster SVG files

← Sea monster in the waves All 16 monsters Three little monsters in a row →