Free monster SVG

Tall monster with long arms SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Tall monster with long arms, as a solid black shape
Tall monster with long arms. The preview is the SVG file itself.

A tall bean of a monster with bull horns, three eyes, two fangs that point up and arms that hang down to its feet. It stands well beside a name or a number on a card.

What is in the file

Size74 × 100 mm (2.92 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length865 mm at this size
Narrowest part1.1 mm at this size
Nodes308 curve and line segments

Measured from the file. PNG: 1,502 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.74 × 1 in (19 × 25 mm)0.28 mm220 mm120Too fine for most machines
1.48 × 2 in (38 × 51 mm)0.56 mm439 mm35Fine detail: vinyl and paper only, weed with care
2.22 × 3 in (56 × 76 mm)0.84 mm659 mm15Fine detail: vinyl and paper only, weed with care
2.96 × 4 in (75 × 102 mm)1.1 mm879 mm6Vinyl, card and thin sheet
4.45 × 6 in (113 × 152 mm)1.7 mm1,318 mm2Vinyl, card and thin sheet
5.93 × 8 in (151 × 203 mm)2.2 mm1,758 mm1Vinyl, card and thin sheet
8.89 × 12 in (226 × 305 mm)3.4 mm2,637 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monster SVG files

← Little monster on big feet All 16 monsters Three-eyed monster with tentacles →