Little monster on big feet SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A low, wide ball of fur with eyes that sit on top of its head, two small horns, a row of four teeth and two big feet. A good one to cut small for stickers and cupcake toppers.
What is in the file
| Size | 100 × 86 mm (3.94 × 3.39 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 824 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 305 curve and line segments |
Measured from the file. PNG: 2,000 × 1,731 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.86 in (25 × 22 mm) | 0.53 mm | 209 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.72 in (51 × 44 mm) | 1.1 mm | 419 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.58 in (76 × 66 mm) | 1.6 mm | 628 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.44 in (102 × 87 mm) | 2.1 mm | 837 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.16 in (152 × 131 mm) | 3.2 mm | 1,256 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.88 in (203 × 175 mm) | 4.3 mm | 1,674 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.32 in (305 × 262 mm) | 6.4 mm | 2,512 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More monster SVG files
-
Tall monster with long arms Solid · one piece
-
Three-eyed monster with tentacles Solid · one piece
-
Monster face with three eyes Solid · one piece
-
Monster mouth with teeth and tongue Solid · one piece
-
Monster teeth, top and bottom rows Solid · 2 pieces
-
Monster eyes, set of seven Solid · 7 pieces
-
Peeking monster Solid · one piece
-
Valentine monster shaped like a heart Solid · one piece
← Cute monster with feelers All 16 monsters Tall monster with long arms →