Free monster SVG

Cute monster with feelers SVG

Cute monster with feelers, as a solid black shape
Cute monster with feelers. The preview is the SVG file itself.

A smooth egg of a monster with two eyes that look at each other, a feeler each side with a ball on the end, one tooth and a spotted tummy. For party bags and birthday shirts.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size92 × 100 mm (3.64 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length792 mm at this size
Narrowest part3.2 mm at this size
Nodes277 curve and line segments

Measured from the file. PNG: 1,854 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.81 mm201 mm100Fine detail: vinyl and paper only, weed with care
1.85 × 2 in (47 × 51 mm)1.6 mm402 mm25Vinyl, card and thin sheet
2.77 × 3 in (70 × 76 mm)2.4 mm604 mm12Vinyl, card and thin sheet
3.7 × 4 in (94 × 102 mm)3.3 mm805 mm6Any material, including 3 mm wood and acrylic
5.54 × 6 in (141 × 152 mm)4.9 mm1,207 mm2Any material, including 3 mm wood and acrylic
7.39 × 8 in (188 × 203 mm)6.5 mm1,609 mm1Any material, including 3 mm wood and acrylic
11.09 × 12 in (282 × 305 mm)9.8 mm2,414 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monster SVG files

← One-eyed monster All 16 monsters Little monster on big feet →