Free monster SVG

Monster face with three eyes SVG

Monster face with three eyes, as a solid black shape
Monster face with three eyes. The preview is the SVG file itself.

Only the face: a square head with bent horns, fin ears, three eyes and a wide mouth with six teeth above and two fangs below. Sized to fill a treat bag, a shirt front or a door.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 90 mm (3.94 × 3.56 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length834 mm at this size
Narrowest part3.7 mm at this size
Nodes252 curve and line segments

Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.94 mm212 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.81 in (51 × 46 mm)1.9 mm424 mm30Vinyl, card and thin sheet
3 × 2.71 in (76 × 69 mm)2.8 mm636 mm12Vinyl, card and thin sheet
4 × 3.62 in (102 × 92 mm)3.8 mm847 mm6Any material, including 3 mm wood and acrylic
6 × 5.42 in (152 × 138 mm)5.6 mm1,271 mm2Any material, including 3 mm wood and acrylic
8 × 7.23 in (203 × 184 mm)7.5 mm1,695 mm1Any material, including 3 mm wood and acrylic
12 × 10.85 in (305 × 276 mm)11 mm2,542 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monster SVG files

← Three-eyed monster with tentacles All 16 monsters Monster mouth with teeth and tongue →