Free monster SVG

Monster mouth with teeth and tongue SVG

Monster mouth with teeth and tongue, as a solid black shape
Monster mouth with teeth and tongue. The preview is the SVG file itself.

A wide open mouth: full lips, six pointed teeth above, four below and a tongue. Put it on a bin, a letter box or a tissue box and the opening becomes the mouth.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 62 mm (3.94 × 2.45 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length656 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes169 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,273 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.62 in (25 × 16 mm)Over 1.5 mm167 mm140Vinyl, card and thin sheet
2 × 1.24 in (51 × 32 mm)Over 3 mm333 mm40Any material, including 3 mm wood and acrylic
3 × 1.87 in (76 × 47 mm)Over 4.6 mm500 mm15Any material, including 3 mm wood and acrylic
4 × 2.49 in (102 × 63 mm)Over 6.1 mm666 mm8Any material, including 3 mm wood and acrylic
6 × 3.73 in (152 × 95 mm)Over 9.1 mm1,000 mm3Any material, including 3 mm wood and acrylic
8 × 4.98 in (203 × 126 mm)Over 12 mm1,333 mm2Any material, including 3 mm wood and acrylic
12 × 7.46 in (305 × 190 mm)Over 18 mm1,999 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monster SVG files

← Monster face with three eyes All 16 monsters Monster teeth, top and bottom rows →