Free monster SVG

Monster teeth, top and bottom rows SVG

Monster teeth, top and bottom rows, as a solid black shape
Monster teeth, top and bottom rows. The preview is the SVG file itself.

Two rows of uneven pointed teeth, each hanging from its own gum line, as two loose pieces. Cut them from white and stick them along the lid and the body of a box, a bag or a bucket.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 64 mm (3.94 × 2.53 in), scales to any size
Pieces2 separate pieces
Outlines to cut2 outlines
Cut length651 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes316 curve and line segments

Measured from the file. PNG: 2,000 × 1,312 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.64 in (25 × 16 mm)Over 1.5 mm165 mm140Vinyl, card and thin sheet
2 × 1.28 in (51 × 33 mm)Over 3 mm331 mm40Any material, including 3 mm wood and acrylic
3 × 1.93 in (76 × 49 mm)Over 4.6 mm496 mm15Any material, including 3 mm wood and acrylic
4 × 2.57 in (102 × 65 mm)Over 6.1 mm661 mm8Any material, including 3 mm wood and acrylic
6 × 3.85 in (152 × 98 mm)Over 9.1 mm992 mm3Any material, including 3 mm wood and acrylic
8 × 5.14 in (203 × 130 mm)Over 12 mm1,323 mm2Any material, including 3 mm wood and acrylic
12 × 7.7 in (305 × 196 mm)Over 18 mm1,984 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monster SVG files

← Monster mouth with teeth and tongue All 16 monsters Monster eyes, set of seven →