Free monster SVG

Monster outline SVG

Monster outline, drawn as a line
Monster outline. The preview is the SVG file itself.

The little monster on big feet drawn as one even line: two round eyes with their pupils, two horns and a wide smile that runs from side to side. For colouring pages, foil and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 86 mm (3.94 × 3.39 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length1,321 mm at this size
Narrowest part2.5 mm at this size
Nodes461 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,731 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.86 in (25 × 22 mm)0.64 mm336 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.72 in (51 × 44 mm)1.3 mm671 mm30Vinyl, card and thin sheet
3 × 2.58 in (76 × 66 mm)1.9 mm1,007 mm12Vinyl, card and thin sheet
4 × 3.44 in (102 × 87 mm)2.5 mm1,342 mm6Vinyl, card and thin sheet
6 × 5.16 in (152 × 131 mm)3.8 mm2,013 mm2Any material, including 3 mm wood and acrylic
8 × 6.88 in (203 × 175 mm)5.1 mm2,684 mm1Any material, including 3 mm wood and acrylic
12 × 10.32 in (305 × 262 mm)7.6 mm4,026 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monster SVG files

← Furry monster silhouette All 16 monsters One-eyed monster →