Free monster SVG

Sea monster in the waves SVG

Sea monster in the waves, as a solid black shape — Sea monster in the waves. The preview is the SVG file itself.

A friendly sea serpent: a small head on a long neck, two loops of body and a forked tail rising from a strip of waves, with a row of spines down its neck. One piece, joined along the water.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 72 mm (3.94 × 2.85 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	563 mm at this size
Narrowest part	2.2 mm at this size
Nodes	196 curve and line segments

Measured from the file. PNG: 2,000 × 1,469 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.72 in (25 × 18 mm)	0.56 mm	143 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.45 in (51 × 37 mm)	1.1 mm	286 mm	35	Vinyl, card and thin sheet
3 × 2.17 in (76 × 55 mm)	1.7 mm	429 mm	15	Vinyl, card and thin sheet
4 × 2.9 in (102 × 74 mm)	2.2 mm	572 mm	6	Vinyl, card and thin sheet
6 × 4.34 in (152 × 110 mm)	3.4 mm	858 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.79 in (203 × 147 mm)	4.5 mm	1,144 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.69 in (305 × 221 mm)	6.7 mm	1,716 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monster SVG files

← Valentine monster shaped like a heart All 16 monsters Girl monster with a bow →