Free monster SVG

Three little monsters in a row SVG

Three little monsters in a row, as a solid black shape — Three little monsters in a row. The preview is the SVG file itself.

The tall monster, the little monster on big feet and the egg with feelers standing side by side and touching, welded into one piece. For banners, classroom doors and party invitations.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 53 mm (3.94 × 2.1 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	30: 1 outer edge and 29 cut-outs
Cut length	1,018 mm at this size
Narrowest part	1.6 mm at this size
Nodes	660 curve and line segments

Measured from the file. PNG: 2,000 × 1,102 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.53 in (25 × 14 mm)	0.41 mm	259 mm	160	Too fine for most machines
2 × 1.07 in (51 × 27 mm)	0.81 mm	517 mm	45	Fine detail: vinyl and paper only, weed with care
3 × 1.6 in (76 × 41 mm)	1.2 mm	776 mm	18	Vinyl, card and thin sheet
4 × 2.13 in (102 × 54 mm)	1.6 mm	1,034 mm	10	Vinyl, card and thin sheet
6 × 3.2 in (152 × 81 mm)	2.4 mm	1,551 mm	3	Vinyl, card and thin sheet
8 × 4.26 in (203 × 108 mm)	3.3 mm	2,069 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.4 in (305 × 162 mm)	4.9 mm	3,103 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monster SVG files

← Girl monster with a bow All 16 monsters Furry monster silhouette →