Free monster SVG

Peeking monster SVG

Peeking monster, as a solid black shape
Peeking monster. The preview is the SVG file itself.

A furry monster looking over a ledge: the top of its head, two eyes looking down, two horns and four fingers gripping the edge on each side. Line the ledge up with the top of a pocket, a frame or a name.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 65 mm (3.94 × 2.56 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length655 mm at this size
Narrowest part2.5 mm at this size
Nodes259 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,329 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 17 mm)0.64 mm166 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.3 in (51 × 33 mm)1.3 mm333 mm40Vinyl, card and thin sheet
3 × 1.95 in (76 × 50 mm)1.9 mm499 mm15Vinyl, card and thin sheet
4 × 2.6 in (102 × 66 mm)2.5 mm665 mm8Vinyl, card and thin sheet
6 × 3.91 in (152 × 99 mm)3.8 mm998 mm2Any material, including 3 mm wood and acrylic
8 × 5.21 in (203 × 132 mm)5.1 mm1,331 mm2Any material, including 3 mm wood and acrylic
12 × 7.81 in (305 × 198 mm)7.6 mm1,996 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monster SVG files

← Monster eyes, set of seven All 16 monsters Valentine monster shaped like a heart →