Free monster SVG

Monster eyes, set of seven SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Monster eyes, set of seven, as a solid black shape
Monster eyes, set of seven. The preview is the SVG file itself.

Seven loose googly eyes in different sizes, each a ring with its pupil joined on, looking in different directions. Stick a pair on a jar, a pumpkin, a door or a lunch box to turn it into a monster.

What is in the file

Size97 × 100 mm (3.82 × 3.94 in), scales to any size
Pieces7 separate pieces
Outlines to cut21: 7 outer edges and 14 cut-outs
Cut length1,295 mm at this size
Narrowest part1.6 mm at this size
Nodes132 curve and line segments

Measured from the file. PNG: 1,942 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.97 × 1 in (25 × 25 mm)0.41 mm329 mm100Too fine for most machines
1.94 × 2 in (49 × 51 mm)0.81 mm658 mm25Fine detail: vinyl and paper only, weed with care
2.91 × 3 in (74 × 76 mm)1.2 mm987 mm9Vinyl, card and thin sheet
3.88 × 4 in (99 × 102 mm)1.6 mm1,316 mm4Vinyl, card and thin sheet
5.82 × 6 in (148 × 152 mm)2.4 mm1,974 mm2Vinyl, card and thin sheet
7.76 × 8 in (197 × 203 mm)3.3 mm2,631 mm1Any material, including 3 mm wood and acrylic
11.64 × 12 in (296 × 305 mm)4.9 mm3,947 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monster SVG files

← Monster teeth, top and bottom rows All 16 monsters Peeking monster →