Free lips SVG

Parted lips with teeth SVG

Parted lips with teeth, as a solid black shape — Parted lips with teeth. The preview is the SVG file itself.

Lips open on a row of upper teeth, with the dark of the mouth below them and a fine line above the lower lip. The bars between the teeth hold it all in one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 54 mm (3.94 × 2.13 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	598 mm at this size
Narrowest part	1.7 mm at this size
Nodes	89 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,115 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.54 in (25 × 14 mm)	0.43 mm	152 mm	160	Too fine for most machines
2 × 1.08 in (51 × 27 mm)	0.86 mm	304 mm	45	Fine detail: vinyl and paper only, weed with care
3 × 1.62 in (76 × 41 mm)	1.3 mm	456 mm	18	Vinyl, card and thin sheet
4 × 2.16 in (102 × 55 mm)	1.7 mm	608 mm	10	Vinyl, card and thin sheet
6 × 3.24 in (152 × 82 mm)	2.6 mm	911 mm	3	Vinyl, card and thin sheet
8 × 4.32 in (203 × 110 mm)	3.5 mm	1,215 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.48 in (305 × 165 mm)	5.2 mm	1,823 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lips SVG files

← Dripping lips All 17 lips Pouty heart-shaped lips →