Free lips SVG

Pouty heart-shaped lips SVG

Pouty heart-shaped lips, as a solid black shape — Pouty heart-shaped lips. The preview is the SVG file itself.

A small, full mouth, taller for its width than the others: high rounded peaks and a deep lower lip, with a highlight on each. The doll or pin-up pout, good at sticker size.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 59 mm (3.94 × 2.31 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	499 mm at this size
Narrowest part	2.8 mm at this size
Nodes	97 curve and line segments

Measured from the file. PNG: 2,000 × 1,208 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.59 in (25 × 15 mm)	0.71 mm	127 mm	150	Fine detail: vinyl and paper only, weed with care
2 × 1.18 in (51 × 30 mm)	1.4 mm	253 mm	40	Vinyl, card and thin sheet
3 × 1.76 in (76 × 45 mm)	2.1 mm	380 mm	18	Vinyl, card and thin sheet
4 × 2.35 in (102 × 60 mm)	2.8 mm	507 mm	8	Vinyl, card and thin sheet
6 × 3.53 in (152 × 90 mm)	4.3 mm	760 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.7 in (203 × 119 mm)	5.7 mm	1,014 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.06 in (305 × 179 mm)	8.5 mm	1,521 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lips SVG files

← Parted lips with teeth All 17 lips Smiling lips →