Free lips SVG

Smiling lips SVG

Smiling lips, as a solid black shape — Smiling lips. The preview is the SVG file itself.

Closed lips in a wide smile, the corners lifted well above the middle of the mouth. A friendly mouth for face masks, mugs and cheerful cards.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 34 mm (3.94 × 1.34 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	398 mm at this size
Narrowest part	3.8 mm at this size
Nodes	56 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 733 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.34 in (25 × 9 mm)	0.97 mm	101 mm	220	Fine detail: vinyl and paper only, weed with care
2 × 0.68 in (51 × 17 mm)	1.9 mm	202 mm	65	Vinyl, card and thin sheet
3 × 1.02 in (76 × 26 mm)	2.9 mm	303 mm	27	Vinyl, card and thin sheet
4 × 1.36 in (102 × 35 mm)	3.9 mm	404 mm	14	Any material, including 3 mm wood and acrylic
6 × 2.05 in (152 × 52 mm)	5.8 mm	607 mm	5	Any material, including 3 mm wood and acrylic
8 × 2.73 in (203 × 69 mm)	7.7 mm	809 mm	4	Any material, including 3 mm wood and acrylic
12 × 4.09 in (305 × 104 mm)	12 mm	1,213 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lips SVG files

← Pouty heart-shaped lips All 17 lips Lips outline →