Free lips SVG

Lips biting the lower lip SVG

Lips biting the lower lip, as a solid black shape — Lips biting the lower lip. The preview is the SVG file itself.

Closed lips with three upper teeth showing on one side, pressed into the lower lip, which tucks in under them. The teeth are holes joined to the parting line, so the mouth is one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 46 mm (3.94 × 1.81 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	442 mm at this size
Narrowest part	2.9 mm at this size
Nodes	73 curve and line segments

Measured from the file. PNG: 2,000 × 963 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.46 in (25 × 12 mm)	0.74 mm	112 mm	180	Fine detail: vinyl and paper only, weed with care
2 × 0.92 in (51 × 23 mm)	1.5 mm	225 mm	50	Vinyl, card and thin sheet
3 × 1.38 in (76 × 35 mm)	2.2 mm	337 mm	21	Vinyl, card and thin sheet
4 × 1.84 in (102 × 47 mm)	2.9 mm	449 mm	10	Vinyl, card and thin sheet
6 × 2.77 in (152 × 70 mm)	4.4 mm	674 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.69 in (203 × 94 mm)	5.9 mm	898 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.53 in (305 × 141 mm)	8.8 mm	1,347 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lips SVG files

← Vampire lips with fangs All 17 lips Sparkling lips →