Classic full lips SVG
Full lips with a deep cupid’s bow and a parting line that stops short of each corner, so both lips cut as one piece. The standard pair for make-up bags, mugs and shirts.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 42 mm (3.94 × 1.65 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 402 mm at this size |
| Narrowest part | 2.9 mm at this size |
| Nodes | 52 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 885 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.42 in (25 × 11 mm) | 0.74 mm | 102 mm | 190 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.84 in (51 × 21 mm) | 1.5 mm | 204 mm | 55 | Vinyl, card and thin sheet |
| 3 × 1.26 in (76 × 32 mm) | 2.2 mm | 306 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.68 in (102 × 43 mm) | 2.9 mm | 408 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.52 in (152 × 64 mm) | 4.4 mm | 613 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.36 in (203 × 85 mm) | 5.9 mm | 817 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.04 in (305 × 128 mm) | 8.8 mm | 1,225 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Lips silhouette 
Glossy parted lips 
Kiss print lips 
Dripping lips 
Parted lips with teeth 
Pouty heart-shaped lips 
Smiling lips 
Lips outline 