Glossy parted lips SVG
Lips a little open, with highlights cut out of both lips and a dot of gloss beside them, so they look wet in a single colour. Cut from red or pink vinyl on a pale surface.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 48 mm (3.94 × 1.87 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 481 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 86 curve and line segments |
Measured from the file. PNG: 2,000 × 990 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.48 in (25 × 12 mm) | 0.64 mm | 122 mm | 180 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.95 in (51 × 24 mm) | 1.3 mm | 244 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.42 in (76 × 36 mm) | 1.9 mm | 367 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.9 in (102 × 48 mm) | 2.5 mm | 489 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.85 in (152 × 72 mm) | 3.8 mm | 733 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.8 in (203 × 97 mm) | 5.1 mm | 977 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.7 in (305 × 145 mm) | 7.6 mm | 1,466 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Kiss print lips 
Dripping lips 
Parted lips with teeth 
Pouty heart-shaped lips 
Smiling lips 
Lips outline 
Leopard print lips 
Vampire lips with fangs 