Free lips SVG

Kiss print lips SVG

Kiss print lips, as a solid black shape — Kiss print lips. The preview is the SVG file itself.

A lipstick print like the one left on a letter or a collar: upper and lower lip apart, with fine creases inside each. Two separate pieces by design.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 47 mm (3.94 × 1.84 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	25: 2 outer edges and 23 cut-outs
Cut length	881 mm at this size
Narrowest part	2.2 mm at this size
Nodes	347 curve and line segments

Measured from the file. PNG: 2,000 × 975 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.47 in (25 × 12 mm)	0.56 mm	224 mm	180	Fine detail: vinyl and paper only, weed with care
2 × 0.93 in (51 × 24 mm)	1.1 mm	448 mm	50	Vinyl, card and thin sheet
3 × 1.4 in (76 × 36 mm)	1.7 mm	671 mm	21	Vinyl, card and thin sheet
4 × 1.87 in (102 × 47 mm)	2.2 mm	895 mm	10	Vinyl, card and thin sheet
6 × 2.8 in (152 × 71 mm)	3.4 mm	1,343 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.74 in (203 × 95 mm)	4.5 mm	1,790 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.6 in (305 × 142 mm)	6.7 mm	2,685 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lips SVG files

← Glossy parted lips All 17 lips Dripping lips →