Free lips SVG

Lips outline SVG

Lips outline, drawn as a line
Lips outline. The preview is the SVG file itself.

The lips as a line about 2.5 mm wide: the outer edge and the line where they meet, joined at the corners into one piece. For colouring, foil and engraving.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 42 mm (3.94 × 1.65 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length603 mm at this size
Narrowest part2.4 mm at this size
Nodes55 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 885 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.42 in (25 × 11 mm)0.61 mm153 mm190Fine detail: vinyl and paper only, weed with care
2 × 0.84 in (51 × 21 mm)1.2 mm306 mm55Vinyl, card and thin sheet
3 × 1.26 in (76 × 32 mm)1.8 mm459 mm24Vinyl, card and thin sheet
4 × 1.68 in (102 × 43 mm)2.4 mm613 mm12Vinyl, card and thin sheet
6 × 2.52 in (152 × 64 mm)3.7 mm919 mm4Any material, including 3 mm wood and acrylic
8 × 3.36 in (203 × 85 mm)4.9 mm1,225 mm3Any material, including 3 mm wood and acrylic
12 × 5.04 in (305 × 128 mm)7.3 mm1,838 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lips SVG files

← Smiling lips All 17 lips Leopard print lips →