Free lips SVG

Layered lips on a heart SVG

Layered lips on a heart, in layered colours
Layered lips on a heart. The preview is the SVG file itself.

Four layers to stack: a pale heart, a dark red shadow a little larger than the lips, the red lips with their parting line, and highlights to go on top. A ready-made Valentine.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 90 mm (3.94 × 3.56 in), scales to any size
Pieces6 separate pieces
Outlines to cut7: 6 outer edges and 1 cut-out
Cut length836 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes119 curve and line segments
Layers4: heart, shadow, lips and shine

Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)Over 1.5 mm212 mm110Vinyl, card and thin sheet
2 × 1.81 in (51 × 46 mm)Over 3 mm425 mm30Any material, including 3 mm wood and acrylic
3 × 2.71 in (76 × 69 mm)Over 4.6 mm637 mm12Any material, including 3 mm wood and acrylic
4 × 3.62 in (102 × 92 mm)Over 6.1 mm849 mm6Any material, including 3 mm wood and acrylic
6 × 5.42 in (152 × 138 mm)Over 9.1 mm1,274 mm2Any material, including 3 mm wood and acrylic
8 × 7.23 in (203 × 184 mm)Over 12 mm1,699 mm1Any material, including 3 mm wood and acrylic
12 × 10.85 in (305 × 276 mm)Over 18 mm2,548 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lips SVG files

← Three kiss prints All 17 lips Classic full lips →