Free lips SVG

Dripping lips SVG

Dripping lips, as a solid black shape — Dripping lips. The preview is the SVG file itself.

Glossy closed lips with five drips of different lengths running from the lower lip, each ending in a round bead and welded to the lip with a smooth join.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 72 mm (3.94 × 2.85 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	664 mm at this size
Narrowest part	2.9 mm at this size
Nodes	166 curve and line segments

Measured from the file. PNG: 2,000 × 1,469 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.72 in (25 × 18 mm)	0.74 mm	169 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.45 in (51 × 37 mm)	1.5 mm	337 mm	35	Vinyl, card and thin sheet
3 × 2.17 in (76 × 55 mm)	2.2 mm	506 mm	15	Vinyl, card and thin sheet
4 × 2.9 in (102 × 74 mm)	2.9 mm	675 mm	6	Vinyl, card and thin sheet
6 × 4.34 in (152 × 110 mm)	4.4 mm	1,012 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.79 in (203 × 147 mm)	5.9 mm	1,349 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.69 in (305 × 221 mm)	8.8 mm	2,024 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lips SVG files

← Kiss print lips All 17 lips Parted lips with teeth →