Free lips SVG

Vampire lips with fangs SVG

Vampire lips with fangs, as a solid black shape — Vampire lips with fangs. The preview is the SVG file itself.

Parted lips with two long fangs and four small teeth between them, cut as holes so they show pale against the dark of the mouth, and two drips falling from the lower lip.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 64 mm (3.94 × 2.53 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	612 mm at this size
Narrowest part	1.5 mm at this size
Nodes	132 curve and line segments

Measured from the file. PNG: 2,000 × 1,313 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.64 in (25 × 16 mm)	0.38 mm	155 mm	140	Too fine for most machines
2 × 1.29 in (51 × 33 mm)	0.76 mm	311 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.93 in (76 × 49 mm)	1.1 mm	466 mm	15	Vinyl, card and thin sheet
4 × 2.57 in (102 × 65 mm)	1.5 mm	622 mm	8	Vinyl, card and thin sheet
6 × 3.86 in (152 × 98 mm)	2.3 mm	933 mm	3	Vinyl, card and thin sheet
8 × 5.14 in (203 × 131 mm)	3 mm	1,244 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.72 in (305 × 196 mm)	4.6 mm	1,865 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lips SVG files

← Leopard print lips All 17 lips Lips biting the lower lip →