Free lips SVG

Dripping lips with teeth SVG

Dripping lips with teeth, as a solid black shape — Dripping lips with teeth. The preview is the SVG file itself.

The parted lips with a row of teeth, and five drips hanging from the lower lip in a matched set: long ones either side of a short one in the middle.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 75 mm (3.94 × 2.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	755 mm at this size
Narrowest part	1.8 mm at this size
Nodes	171 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,515 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.75 in (25 × 19 mm)	0.46 mm	192 mm	120	Too fine for most machines
2 × 1.5 in (51 × 38 mm)	0.91 mm	384 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.24 in (76 × 57 mm)	1.4 mm	575 mm	12	Vinyl, card and thin sheet
4 × 2.99 in (102 × 76 mm)	1.8 mm	767 mm	6	Vinyl, card and thin sheet
6 × 4.49 in (152 × 114 mm)	2.7 mm	1,151 mm	2	Vinyl, card and thin sheet
8 × 5.98 in (203 × 152 mm)	3.7 mm	1,534 mm	1	Any material, including 3 mm wood and acrylic
12 × 8.98 in (305 × 228 mm)	5.5 mm	2,301 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lips SVG files

← Sparkling lips All 17 lips Lips blowing a kiss with hearts →