Free lips SVG

Sparkling lips SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Sparkling lips, as a solid black shape
Sparkling lips. The preview is the SVG file itself.

Closed lips at a tilt, with four-point sparkles and small dots cut out of both lips as if dusted with glitter. Lay them over holographic or glitter vinyl so the sparkles shine.

What is in the file

Size100 × 47 mm (3.94 × 1.83 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length613 mm at this size
Narrowest part1 mm at this size
Nodes115 curve and line segments

Measured from the file. PNG: 2,000 × 973 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.47 in (25 × 12 mm)0.25 mm156 mm180Too fine for most machines
2 × 0.93 in (51 × 24 mm)0.51 mm311 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.4 in (76 × 36 mm)0.76 mm467 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.86 in (102 × 47 mm)1 mm623 mm10Vinyl, card and thin sheet
6 × 2.8 in (152 × 71 mm)1.5 mm934 mm4Vinyl, card and thin sheet
8 × 3.73 in (203 × 95 mm)2 mm1,246 mm3Vinyl, card and thin sheet
12 × 5.59 in (305 × 142 mm)3 mm1,868 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lips SVG files

← Lips biting the lower lip All 17 lips Dripping lips with teeth →