Lips blowing a kiss with hearts SVG
Closed lips tilted up to the right, with three hearts of growing size floating away from them. The hearts are loose pieces by design: place them with transfer tape.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 90 mm (3.94 × 3.55 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 5: 4 outer edges and 1 cut-out |
| Cut length | 438 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 77 curve and line segments |
Measured from the file. PNG: 2,000 × 1,810 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.9 in (25 × 23 mm) | 0.53 mm | 111 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.8 in (51 × 46 mm) | 1.1 mm | 223 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.7 in (76 × 69 mm) | 1.6 mm | 334 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.6 in (102 × 92 mm) | 2.1 mm | 445 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.41 in (152 × 137 mm) | 3.2 mm | 668 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.21 in (203 × 183 mm) | 4.3 mm | 890 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.81 in (305 × 275 mm) | 6.4 mm | 1,335 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Three kiss prints 
Layered lips on a heart 
Classic full lips 
Lips silhouette 
Glossy parted lips 
Kiss print lips 
Dripping lips 
Parted lips with teeth 