Free lips SVG

Leopard print lips SVG

Leopard print lips, as a solid black shape — Leopard print lips. The preview is the SVG file itself.

Tall closed lips covered in leopard spots, broken rings with small dots between them, trimmed to leave a solid rim round both lips. Put gold, glitter or a second colour behind the holes.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 52 mm (3.94 × 2.05 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	31: 1 outer edge and 30 cut-outs
Cut length	821 mm at this size
Narrowest part	1.7 mm at this size
Nodes	322 curve and line segments

Measured from the file. PNG: 2,000 × 1,077 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.52 in (25 × 13 mm)	0.43 mm	209 mm	160	Too fine for most machines
2 × 1.04 in (51 × 26 mm)	0.86 mm	417 mm	45	Fine detail: vinyl and paper only, weed with care
3 × 1.56 in (76 × 40 mm)	1.3 mm	626 mm	18	Vinyl, card and thin sheet
4 × 2.08 in (102 × 53 mm)	1.7 mm	834 mm	10	Vinyl, card and thin sheet
6 × 3.12 in (152 × 79 mm)	2.6 mm	1,251 mm	3	Vinyl, card and thin sheet
8 × 4.16 in (203 × 106 mm)	3.5 mm	1,668 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.24 in (305 × 158 mm)	5.2 mm	2,502 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lips SVG files

← Lips outline All 17 lips Vampire lips with fangs →