Wand with a trail of stars SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A conjuror’s wand at the lower left with a sweep of magic curving up and away from its tip, strung with five stars that shrink as they go. The sweep ties every star to the wand.
What is in the file
| Size | 100 × 94 mm (3.94 × 3.69 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 443 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 128 curve and line segments |
| Also found as | Stars and wand SVG |
Measured from the file. PNG: 2,000 × 1,879 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.94 in (25 × 24 mm) | 0.53 mm | 113 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.87 in (51 × 48 mm) | 1.1 mm | 225 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.81 in (76 × 71 mm) | 1.6 mm | 338 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.75 in (102 × 95 mm) | 2.1 mm | 450 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.62 in (152 × 143 mm) | 3.2 mm | 675 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.5 in (203 × 190 mm) | 4.3 mm | 900 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.24 in (305 × 286 mm) | 6.4 mm | 1,350 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wand SVG files
-
Magic wands, set of three Solid · one piece -
Magic hat and wand Solid · one piece -
Star wand silhouette Solid · one piece -
Star wand outline Outline · one piece -
Wand with a starburst name ring Solid · one piece -
Layered star wand in four colours Layered · 4 pieces -
Star wand with ribbons Solid · one piece -
Magic wand with sparkles Solid · 6 pieces
← Princess crown and wand All 14 wands Magic wands, set of three →