Princess crown and wand SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A three-pointed crown with a jewel on each point, lying across a star wand that slants behind it. A slim seam with bridges parts the two, so crown and wand lift as one piece.
What is in the file
| Size | 96 × 100 mm (3.79 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 632 mm at this size |
| Narrowest part | 3.3 mm at this size |
| Nodes | 101 curve and line segments |
Measured from the file. PNG: 1,929 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.96 × 1 in (24 × 25 mm) | 0.84 mm | 161 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.93 × 2 in (49 × 51 mm) | 1.7 mm | 321 mm | 25 | Vinyl, card and thin sheet |
| 2.89 × 3 in (73 × 76 mm) | 2.5 mm | 482 mm | 9 | Vinyl, card and thin sheet |
| 3.85 × 4 in (98 × 102 mm) | 3.4 mm | 642 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.78 × 6 in (147 × 152 mm) | 5 mm | 963 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.7 × 8 in (196 × 203 mm) | 6.7 mm | 1,284 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.56 × 12 in (294 × 305 mm) | 10 mm | 1,926 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wand SVG files
-
Wand with a trail of stars Solid · one piece -
Magic wands, set of three Solid · one piece -
Magic hat and wand Solid · one piece -
Star wand silhouette Solid · one piece -
Star wand outline Outline · one piece -
Wand with a starburst name ring Solid · one piece -
Layered star wand in four colours Layered · 4 pieces -
Star wand with ribbons Solid · one piece
← Moon wand with a hanging star All 14 wands Wand with a trail of stars →