Layered star wand in four colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Four layers to stack: a purple stick, pink ribbons, a gold star and a pale yellow star for its middle. Cut each from its own colour, or use glitter card for the star.
What is in the file
| Size | 66 × 100 mm (2.59 × 3.94 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 4 outlines |
| Cut length | 615 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 130 curve and line segments |
| Layers | 4: stick, ribbons, star and middle |
Measured from the file. PNG: 1,340 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.66 × 1 in (17 × 25 mm) | Over 1.5 mm | 156 mm | 140 | Vinyl, card and thin sheet |
| 1.31 × 2 in (33 × 51 mm) | Over 3 mm | 312 mm | 40 | Any material, including 3 mm wood and acrylic |
| 1.97 × 3 in (50 × 76 mm) | Over 4.6 mm | 469 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.63 × 4 in (67 × 102 mm) | Over 6.1 mm | 625 mm | 8 | Any material, including 3 mm wood and acrylic |
| 3.94 × 6 in (100 × 152 mm) | Over 9.1 mm | 937 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.26 × 8 in (134 × 203 mm) | Over 12 mm | 1,250 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.88 × 12 in (200 × 305 mm) | Over 18 mm | 1,875 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wand SVG files
-
Star wand with ribbons Solid · one piece -
Magic wand with sparkles Solid · 6 pieces -
Wizard wand with a curl of magic Solid · one piece -
Princess wand with a heart Solid · one piece -
Flower wand with two leaves Solid · one piece -
Moon wand with a hanging star Solid · one piece -
Princess crown and wand Solid · one piece -
Wand with a trail of stars Solid · one piece
← Wand with a starburst name ring All 14 wands Star wand with ribbons →