Wand with a starburst name ring SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A ten-pointed burst with a round window in its middle, on a stick tied with a bow. The window is about 40 mm across at full size: put an initial, an age or a small photograph in it.
What is in the file
| Size | 62 × 100 mm (2.42 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 487 mm at this size |
| Narrowest part | 4.7 mm at this size |
| Nodes | 109 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,260 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.62 × 1 in (16 × 25 mm) | 1.2 mm | 124 mm | 140 | Vinyl, card and thin sheet |
| 1.23 × 2 in (31 × 51 mm) | 2.4 mm | 247 mm | 40 | Vinyl, card and thin sheet |
| 1.84 × 3 in (47 × 76 mm) | 3.6 mm | 371 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.46 × 4 in (62 × 102 mm) | 4.8 mm | 495 mm | 8 | Any material, including 3 mm wood and acrylic |
| 3.69 × 6 in (94 × 152 mm) | 7.2 mm | 742 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.92 × 8 in (125 × 203 mm) | 9.6 mm | 990 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.38 × 12 in (187 × 305 mm) | 14 mm | 1,484 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wand SVG files
-
Layered star wand in four colours Layered · 4 pieces -
Star wand with ribbons Solid · one piece -
Magic wand with sparkles Solid · 6 pieces -
Wizard wand with a curl of magic Solid · one piece -
Princess wand with a heart Solid · one piece -
Flower wand with two leaves Solid · one piece -
Moon wand with a hanging star Solid · one piece -
Princess crown and wand Solid · one piece
← Star wand outline All 14 wands Layered star wand in four colours →